Precise control for whole-cell or single-cell superfusion
Description
Easy to add to any new or existing gravity perfusion system from AutoMate Scientific, any third-party manufacturer, or even homemade rigs. Connect to house air or compressor (30 to 100 psi). Does not introduce bubbles into solution; helps overcome flow problems due to bubbles.
Available in four-, eight- or sixteen-channel configurations. Syringe reservoirs may be placed in a water bath for temperature control. Elegant design allows individual control of each air line.
Features
- Faster Switching
- Steady flow (see two graphs below)
- Microinjecting
- Fine microliter delivery
- Small pipette delivery
- Higher or lower flow rates than gravity (pressure overcomes surface tension in low flow rates)
Upgrade system --- Oxygen8™
For anyone who needs:
- Faster Switching – all with bubbled oxygenation!
- Steady flow
- Microinjecting
- Fine microliter delivery
- Small pipette delivery
Higher or lower flow rates than gravity (pressure overcomes surface tension in low flow rates)
You need rapid liquid switching with oxygenated solutions. How do you bubble Carbogen gas into closed, pressurized reservoirs? That’s the engineering problem AutoMate Scientific has solved with several years of research: bubbled, pressurized perfusion.
You can add the new Oxygen8 to any new or existing gravity perfusion system from AutoMate Scientific, any third-party manufacturer, or even homemade rigs. Connect to your desired gas (30 to 100 psi). Available in four- or eight-channel configurations. Syringe reservoirs may be placed in a water bath for temperature control or combine with the AutoMate BubbleStop™ syringe heater. Elegant design allows individual control of each air line.