Home | Products | Prices | Contact | PTC04

Temperature Controller - PTC04


  • High output power for rapid heating
  • Compatible with our range of heating devices
  • Temperature control below ambient with optional Peltier Controller (PC01)
  • Modular design simple to set up and maintain

The PTC04 is a proportional temperature control unit for use with incubators and temperature controlled solutions located away from sensitive recording instruments since it is powered by an external switch-mode power supply. These types of power supply often produce undesirable noise that can interfere with electrophysiological recordings. A low voltage direct current output is used to power heating elements together with a sensor for feedback proportional control. The required temperature is set using the front control panel. When the display selector is set to control the display reads the temperature of the control sensor. The set temperature must exceed ambient by at least 2 degrees centigrade. Set temperatures are not lost in the event of a power loss: unit can be left to operate from day to day without having to set temperature each time.


Readout accuracy: +/ - 0.1 degrees centigrade.
Control accuracy: 0.5 degrees centigrade below set temperature maximum difference.
Control stability: Not more than +/ - 0.1 degree centigrade from control point.
Output power: 36 Watts Max.
Output type: D.C. Proportional control.
Temperature range: 10 to 60 degrees centigrade.
Sensors: Pt100 Platinum Resistance
Power requirements: 110V / 240V External Switch-Mode supplied with unit
Dimensions: 18cm W x 18.5cm D x 6.5cm H.
Weight: 1Kg.

Click here for a flyer in PDF format.


Home | Products | Prices | Contact | PTC04

Copyright´┐Ż 1999 Scientific Systems Design, Inc.