Home | Products | Prices | Contact | PTC03 | PTC03 Photo

Proportional Temperature Controller PTC03 
Click to View
Features
  • Very low noise direct current output
  • High output power for rapid heating
  • Compatible with our range of heating devices
  • Temperature control below ambient with optional Peltier Controller (PC01)

The PTC03 is a temperature control unit for use in conjunction with our brain slice chambers, perfusion solution heaters and an increasing range of other systems currently under development . The required temperature is set using the front control panel. Provision is also made to display the temperature from a monitor sensor if this is being used. At a setting of 40 degrees, with an ambient of 20 degrees centigrade full control is reached within 10 minutes when used with our submerged and interface mode slice chambers. The set temperature must exceed ambient by at least 2 degrees centigrade.

A flyer in PDF can be downloaded here.



Specifications

Readout Accuracy:

+/- 0.1 degrees centigrade

Output Type:

D.C. proportional control

Power Requirements:

110/240V +/- 10% 60/50Hz, 50 W

Control Accuracy:

0.5 degrees C below set temp. max. diff.

Sensors:

Pt 100 platinum resistance grade B.

Dimensions / Weight:

27cm W x 27cm D x 9cm H / 4 Kg

Control Stability:

Max +/- 0.1 deg. C. from control point.

Temperature range:

10 to 60 deg. C

Output power:

36 Watts max.
   


Home | Products | Prices | Contact | PTC03 | PTC03 Photo

Copyrightę 1999 Scientific Systems Design, Inc.